Roof Tech Inc

SmartCare General Purpose Grout is a versatile and easy-to-use grouting material designed for filling joints between tiles, stones, and masonry. Formulated with high-quality ingredients, it offers excellent strength, durability, and resistance to cracking and shrinking. This grout is suitable for both interior and exterior applications, making it ideal for kitchens, bathrooms, patios, and other tiled surfaces.

SmartCare General Purpose Grout is available in a variety of colors to match different tile and stone installations, allowing for seamless integration with your design aesthetic. Its smooth consistency ensures easy application and uniform filling of grout joints, resulting in a professional finish. Additionally, this grout is water-resistant and resistant to mold and mildew growth, making it suitable for wet areas and high-moisture environments. Whether you're a professional contractor or a DIY enthusiast, SmartCare General Purpose Grout provides a reliable solution for achieving clean, durable, and aesthetically pleasing tile installations.

ArmGroutM-65 is recommended for precision grouting where it is essential to with standStatic & Dynamic load in typical applications like base plate of Generators, compressors, boilers etc. It is basically a free flow no shrink, high strength expansive grout. It is based on port land cement with graded aggregates and additives which impart controlled expansion in the plastic state. The non-shrink grout function is three folds, to fill the voids between the base plate and the concrete foundations completely and permanently without shrinkage or separating from either to transfer all loads from the base plate to the concrete foundation and to maintain precise alignment. It effectively transfers all operational loads to the foundation.

Description SuperThermoLay® is a five layered system with Atactic Polypropylene (APP) modified non-woven polyester reinforced weighing 140 gm / m2 bituminous membrane (2, 3, 4 & 5 mm) for superior waterproofing. The torch side of the membrane is covered with polyethylene film for protection of the membrane. The polymer modification of bitumen with APP results in an excellent resistance to hot and cold temperatures. SuperThermoLay® is supplied in following variants: • Plain finish with thermo-fusible polyethylene film on both surfaces. • Mineral / natural grey slate finish with thermo-fusible polyethylene film on one surface, and mineral / natural gray slate on the other surface

PRODUCT DESCRIPTION Asian Paints SmartCare Waterproofing Membrane is a APP modified glass fiber sheet reinforced bituminous membrane for superior waterproofing. This membrane exhibits excellent tensile strength, tear strength, puncture resistance and dimensional stability. The torch side of the membrane is covered with polyethylene film for protection of the membrane. USES Waterproofing /damproofing membrane in horizontal and vertical applications for protection of various substrates like concrete, masonry, GI, aluminium, wood etc. in wide range of uses: > > > > > > Accessible and non accessible medium to large roof slabs in domestic, commercial and industrial construction.( As per specified system for accessibility) Basements and raft slabs Swimming Pools Roof Gardens Underground car parks Bridges & Tunnels

ArmGroutM-65 is recommended for precision grouting where it is essential to with standStatic & Dynamic load in typical applications like base plate of Generators, compressors, boilers etc. It is basically a free flow no shrink, high strength expansive grout. It is based on port land cement with graded aggregates and additives which impart controlled expansion in the plastic state. The non-shrink grout function is three folds, to fill the voids between the base plate and the concrete foundations completely and permanently without shrinkage or separating from either to transfer all loads from the base plate to the concrete foundation and to maintain precise alignment. It effectively transfers all operational loads to the foundation. (Formerly known asMYK Grout M-65) Application Methodology Step no 1:Surface Preparation: The substrate must sound clean and free from contaminations, all loose particles must be removed. The steel and concrete surfaces must be etched mechanically to enhance the bonding properties. Bolt holes and fixing pockets must be blown clean of any dirt or debris. Pre-soaking Presoak theconcrete surface with lots of clean water before the application is carriedout. All the surplus water isremoved before the grouting application. Step no 2: ProductMixing: Use chilled water for mixing in case of high ambient temperature. Use hot waterfor mixing in case of very low ambient temperature. Depending on requirements and site conditions the addition of dry, single size and clean aggregates is possible. Trials are recommended to confirm suitability of aggregates to be used. Step no 3: ProductApplication: Water Powder Ratio: W/P: 0.18 Consistency: Flowable Grout Water required for 25 Kgs bag:4.5 Lts Flow Characteristics: The flow is basically depends on the gap width and the head of the grout and governed by the gap width. Yield:13.0 Lts at flow able consistency for 25 Kgs of HDPE Bags Pouring: The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100mm. Placing: For thicker sections replace grout with 10mm graded silt free aggregates (washed air dried) by weight of max 100%. Working Condition: Do not place the grout when the ambient temperature is 5 deg Celsius. Use hot water to gain the strength when the temperature is low and cold water when the temperature is high. Removable Chute: For large pours the grout may be hand placed or pumped into a removable chute ( trough) Pouring should be from one side of the void to eliminate any air or presoaked water becoming trapped under the base plate. It is advisable to pour the grout across the shortest distance of travel. The grout head must be maintained at all times so that a continuous grout front is achieved. Where large volumes have to be placed ArmGrout M 65 may bepumped. A heavy duty diaphragm pump is recommended for this purpose. Screw feed and piston pumps may also be suitable Ver/6/Oct 2021 1 of 3 Features and Benefits  Develops very high early and final strengths  Non-shrink: basically, a non-shrink  Excellent flow characteristics  Ensures high level contact with bond area  Chloride free  Does not affect the steel or foundation bolts.  Gaseous expansion systemcompensates for shrinkage and settlement in the plastic state  No metallic iron content to cause staining  Pre-packed material overcomes onsite batching variations  Free flow ensures high level of contact with load bearing area

Sikalastic®-520 Cool Coat Fibers IN is a 1-part, acrylic, water based, elastic, cold applied liquid membrane that can be applied directly from the container.

SikaRapid®-1 is a fast-setting, cementitious, patching mortar used for repairing horizontal concrete surfaces. It's designed to quickly repair and level concrete surfaces, providing excellent adhesion and durability. SikaRapid®-1 is commonly used for filling and smoothing concrete floors, repairing spalled or damaged concrete, and fixing surface defects. Its rapid-setting properties make it ideal for projects where time is of the essence, allowing for faster completion and reduced downtime.

We are engaged in offering xxxxxxx to our clients. Our range of Products is widely appreciated by our clients.

Every concrete manufacturer wants to produce high quality concrete, while achieving better consistency, productivity, innovation and cost-effectiveness. Fosroc has developed a wide range of technically superior solutions for the entire concrete industry – with solutions that cover every stage, from initial technical work right through to the final application.

Fosroc is a leader in concrete admixtures, with tailor-made formulations carefully designed for specific customer use. Our renowned Aura, Structuro and Conplast series deliver high quality, exceptional performance and cost-effective solutions for concrete producers all over the world.

Non-reinforced Smartcare PVC Membrane, opaque, made of flexible polyvinyl chloride (PVC-P), with thin yellow signal layer, designed for tunnels and basement works. This Membrane is not suitable for permanent exposure to UV-radiation.

SmartCare EPDM Membrane is a preformed elastomeric waterproofing membrane made up of high quality EPDM rubber. This membrane exhibits high tensile strength, elongation, tear strength and is also resistant to weathering, heat ageing, ozone, UV rays, acids, alkalis & oxygenated solvents.

Asian Paints SmartCare Repair Mortar is a high-performance repair mortar designed to effectively repair and restore concrete surfaces. It is specially formulated to provide strong adhesion and excellent durability, making it suitable for repairing cracks, spalls, and other surface imperfections in concrete structures.
This repair mortar offers superior bonding strength and resistance to weathering, ensuring long-lasting repairs that withstand harsh environmental conditions. It can be applied to horizontal, vertical, and overhead surfaces, offering versatility for various repair applications.
Asian Paints SmartCare Repair Mortar is easy to mix and apply, allowing for hassle-free repairs by both professionals and DIY enthusiasts. Once applied, it sets quickly and cures rapidly, minimizing downtime and ensuring a speedy return to service for repaired areas.
With its advanced formulation and reliable performance, Asian Paints SmartCare Repair Mortar is an ideal solution for maintaining the structural integrity and appearance of concrete surfaces in residential, commercial, and industrial settings.

We are engaged in offering xxxxxxx to our clients. Our range of Products is widely appreciated by our clients.

We are engaged in offering xxxxxxx to our clients. Our range of Products is widely appreciated by our clients.

Fosroc Renderoc® HSXtra Shrinkage controlled, polymer modified, cementitious, high specifi cation repair mortar system Uses Renderoc HSXtra is suitable for hand and spray application for repairs where high load bearing is required. Typical ap plications would include, but not be limited to, the following:  Vertical and overhead repairs to restore ‘covercrete’  General concrete and masonry repairs  Voids greater than 10 mm deep  Repairs to honeycombing  Larger scale repairs where formwork cannot be erected

Sikadur®-31 IN Sikadur®-31 IN is a solvent-free, moisture tolerant, thixotropic, two part structural adhesive and repair mortar, based on epoxy resins and special fillers, de signed for use at temperatures between +10°C and +40°C.

AquaArm 2C-P is a two component cementitious coating system for waterproofing of wet areas and any waterretaining structures such as swimming pools and water features.It conforms to Class II requirement as per AS/NZS 4858

ShaliSeal® PS PG 2K Pouring Grade UV Resistant Polysulphide Sealant  Description ShaliSeal® PS PG is two component, polysulphide polymer based, UV resistant, flexible tear resistant, rubbery, self-leveling, pourable, non-staining sealant, which adheres to most of building materials like cementitious substrates, aluminum, glass, wood, mild steel, etc. It cures at ambient temperature, has excellent recovery characteristics after extended period of compression / elongation with outstanding resistance to most chemicals, weather conditions, aging and shrinkage. It conforms to BS 5212 : 1990 Part I - Type F & Type FB (Flame and Fuel Resistant), IS 12118  Part 1 - 1987, BS : 4254 and ASTM C 920 and BN EN 14188 - 2 : 2004

High strength non-shrink pourable cementitious precision grout DESCRIPTION SikaGrout®-214 IN is a cement based 1-component, ready to mix, non-shrink, pourable and flowable, two stage expanding engineering grout in dry powder form. It is widely used for precision grouting in engin eering applications subjected to static and dynamic loads. USES To grout bearings, machine foundations, columns joints in precast construction etc. ▪ To grout anchors in concrete ▪ To grout cavities, gaps and voids in concrete ▪ To grout base plate of turbine, compressor, boilers, pumps and heavy machinery ▪ Sealing around penetrations ▪ Post fixings ▪ CHARACTERISTICS / ADVANTAGES Dual shrinkage compensated ▪ Suitable for temperature of above 0 °C up to +200 °C ▪ Easy to mix, only add water ▪ Adjustable consistency ▪ Very good flow characteristics ▪ Rapid strength development ▪ Excellent bond to concrete ▪ No segregation or bleeding ▪ High final strengths ▪ Initial expansion by gas generation ▪ Impact and vibration resistant ▪ Non-corrosive to anchor bolts, base plate / saddle / frame, sliding plate ▪ Not harmful to concrete and reinforcing steel ▪ Not flammable ▪ Non-toxic ▪ Frost, oil and fire resistant ▪ Require normal curing ▪ Suitable to use under restraints and grout thickness required ▪ Expansive to counteract initial shrinkage ▪ Maximum flow distance is compatible to the dimen sions of base plate / saddle / frame ▪ Resistant to the chemicals, gases etc. being handled in equipment ▪ Chloride free

Injector nozzles interact with Pistons in Combustion Chambers. When the Piston is drawn away from the Sparkplug, the Injector Nozzle sprays a fuel and air mixture into the Combustion Chamber. Injector Nozzles can be thought of as the “heart” of the engine.

LATICRETE® 315 Plus is a single-component, polymer-modified adhesive designed for interior floor and wall installations and external floor installations. It is suitable for bonding various types of ceramic tiles, vitrified tiles and precast terrazzo to concrete and other cement-based substrates.

It is value for money, easy to use and provides high bond strength, making it ideal for tile on tile installation for old floor renovation.

We are engaged in offering xxxxxxx to our clients. Our range of Products is widely appreciated by our clients.

SmartCare Ultra Block 2K is a two component acrylic polymer modified high performance coating system. Suitable for water retaining structure due to its excellent bonding, good waterproofing and excellent resistance to hydrostatic pressure by forming elastic seamless coating.

SmartCare Acrylic Bonding Agent is a specialized adhesive designed to improve the bonding strength between old and new concrete surfaces. It serves as a bridge between the existing substrate and the new concrete layer, enhancing adhesion and preventing delamination. This bonding agent is formulated with high-quality acrylic polymers, ensuring excellent durability and compatibility with various construction materials.
With its advanced formulation, SmartCare Acrylic Bonding Agent promotes a strong and long-lasting bond, making it suitable for a wide range of applications such as concrete repairs, overlays, and patching. It helps minimize surface preparation time and ensures a seamless transition between different concrete surfaces, resulting in enhanced structural integrity and performance. Easy to apply and quick to dry, this bonding agent offers convenience and reliability for construction professionals and DIY enthusiasts alike.

We are engaged in offering xxxxxxx to our clients. Our range of Products is widely appreciated by our clients.

We are engaged in offering xxxxxxx to our clients. Our range of Products is widely appreciated by our clients.

We are engaged in offering xxxxxxx to our clients. Our range of Products is widely appreciated by our clients.

From general purpose mortars to fire cements,  Bostik has developed a comprehensive range of mortar solutions to repair and restore such substrates. Discover more about repair mortars

SikaCeram®-155 Wet Room is a polymer modified, cementitious, normal setting, self curing, easy fixing floor and wall tile adhesive with no vertical slip. It can create adhesive layers up to 10 mm thickness. For small, medium sized ceramic and vitrified tiles in residential environments.

LikeDislikeDr. Fixit offers a wide range of waterproofing chemicals designed for roofs, terraces, below-ground structures, and concrete repair, providing long-lasting protection against water seepage and structural damage.Key Products and Applications

We are engaged in offering xxxxxxx to our clients. Our range of Products is widely appreciated by our clients.

We are engaged in offering xxxxxxx to our clients. Our range of Products is widely appreciated by our clients.

We are engaged in offering xxxxxxx to our clients. Our range of Products is widely appreciated by our clients.

We are engaged in offering xxxxxxx to our clients. Our range of Products is widely appreciated by our clients.

LikeDislikeAsian Paints SmartCare Repair Mortar is a ready-to-use, polymer-modified repair mortar designed for durable and crack-resistant repairs of concrete and masonry surfaces.

Asian Paints SmartCare Micro Concrete is a high-performance repair mortar specifically engineered to restore and strengthen concrete surfaces. It's designed to repair damaged or deteriorated concrete structures, including columns, beams, slabs, and floors, providing structural integrity and durability.
This micro-concrete offers exceptional bonding strength and durability, ensuring long-lasting repairs that withstand heavy loads and harsh environmental conditions. It effectively fills voids, cracks, and spalls, creating a smooth and uniform surface finish.
Asian Paints SmartCare Micro Concrete is easy to mix and apply, allowing for hassle-free repairs by professionals and DIY enthusiasts alike. It sets rapidly and cures quickly, minimizing downtime and enabling a speedy return to service for repaired areas.
With its advanced formulation and reliable performance, Asian Paints SmartCare Micro Concrete is an ideal solution for repairing and strengthening concrete surfaces in residential, commercial, and industrial applications.

Free fl ow, high strength, non-shrink, cementitious precision grout Uses Conbextra GP2 is used for precision grouting where it is essential to withstand static and dynamic loads. Typical applications would be grouting of base plates of turbines, compressors, boiler feed pumps, bridge bearing pedastal applications & other critical applications. It can be used for anchoring a wide range of fi xing i.e masts, anchor bolts and fence posts.. Advantages Gaseous expansion system compensates for shrinkage and settlement in the plastic state No metallic iron content to cause staining Pre-packed material overcomes onsite batching variations Develops high early strength without the use of chlorides High ultimate strength ensure the durability of the hardened grout Free fl ow ensures high level of contact with load bearing area Resistant to oil Standard Compliance Conbextra GP2 conforms to ASTM C1107 (Standard Specifi cation for Packaged Dry, Hydraulic-Cement Grout (Non-shrink). Description Conbextra GP2 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free fl owing, non-shrink grout for gap thicknesses up to 100mm. Conbextra GP2 is a blend of Portland cement, graded fi llers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fi llers are designed to assist uniform mixing and produce a consistent grout

SealArm PU Flex isa one component, medium-moduluspigmentedpolyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to all construction materials. The sealant possesses movement capability of 25% and conforms to BS 6920 for the metallic water soluble impurities and is suitable for use in drinking water system.It meets the test requirements of ASTM C-920, Type S, Grade NS, Class 25

ArmGrout Inject PU1resin is a solvent free polyurethane injection material which is used in conjunction withArmGrout Inject PU1catalyst.ArmGrout Inject PU1foamswithwatercontactby highincreaseinvolumeandbecomesfirmviscoelastic foam, whichsealstemporarilyagainst furtherwater penetration.ArmGrout Inject PU1is resistant against acids and lyes and attacks neither bitumen nor joint tapes. In case of very dry surfaces the material does not foamimmediatelybut it hardens slowly due to the steady addition ofexisting air resp. soil moisture.

CYH-500 is a hydrophobic grout based on polyurethane.

Upon contact with water, CYH-500 reacts to closed cell rubber-like foam while expanding its volume up to 27 times. The cured material is of a constant volume. Since water is not a component of the foam structure, the cured material is essentially not affected by water or dryness. The reacted material does not shrink or swell. Depending on the pressure of injection, CYH-500 reacts to a very dense material or foam.